Knight Caster Retrofit'Nomic Station |
 |
Unpack & identify parts: (16) screws (1) wood drill fixture (1) 1/8" drill bit (4) casters. You will also need a #2 phillips screwdriver, some wax to lubricate the screws, a clamp and a drill motor. |
 |
Remove everything from the desk,
including the pull out work surfaces. Turn desk upside down |
 |
Slide drill fixture over leg |
 |
Clamp drill fixture. Any kind of clamp will do, like a C clamp, hand clamp, etc. |
 |
Drill (4) holes using drill bit
supplied.
Make sure you keep the drill motor straight. |
 |
Wax and install (4) screws per caster. |